Handlebar Switches; Throttle Lever - Yamaha YFM250R Owner's Manual

EBU18061

Handlebar switches

1
2
3
1
4
5
2
3
6
7
1. Light switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
8
3. Start switch "START"
9
EBU18070
Engine stop switch "ENG. STOP"
Set this switch to "RUN" before starting the engine.
10
The engine stop switch controls the ignition and
11
stops the engine when it is running. Use this switch
to stop the engine in an emergency situation. The
engine will not start or run when this switch is set
to "OFF".
EBU18090
Start switch "START"
Push this switch to crank the engine with the start-
er.
ECB00050
CAUTION:
See the starting instructions on page 6-1 prior
to starting the engine.
EBU18120
Light switch "LIGHTS"
Set this switch to "LO" to turn on the low beams
and the taillight. Set the switch to "HI" to turn on the
high beams and the taillight. Set the switch to
"OFF" to turn off all the lights.
NOTE:
The headlights and the taillight can be turned on
only when the engine is running.
EBU18280

Throttle lever

Once the engine is running, movement of the throt-
tle lever will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine will
4-2