Brake Light Switches; Checking And Lubricating The Cables - Yamaha KODIAK 700 2018 Owner's Manual

1
1. Rear axle boot (each side)
EBU34270

Brake light switches

The brake light, which is activated by the brake
8
pedal and brake levers, should come on just be-
fore braking takes effect.
The rear brake light switch can be adjusted as fol-
lows, but the front brake light switch should be ad-
justed by a Yamaha dealer.
Turn the rear brake light switch adjusting nut while
holding the brake light switch in place. To make
the brake light come on earlier, turn the adjusting
nut in direction (a). To make the brake light come
on later, turn the adjusting nut in direction (b).
1
1. Rear brake light switch adjusting nut
2. Rear brake light switch
EBU24905

Checking and lubricating the cables

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
8-48
Recommended lubricant:
Yamaha cable lubricant or other suitable
cable lubricant
1
(b)
2
(a)