Brake Light Switches - Yamaha Grizzly 450 2010 Owner's Manual

1
1. Front axle boot (each side)
1. Rear axle boot (each side)
EBU29880

Brake light switches

1
The brake light, which is activated by the brake
pedal and brake levers, should come on just be-
fore braking takes effect.
The brake light switch for the brake pedal can be
adjusted as follows, but the other brake light
switches should be adjusted by a Yamaha dealer.
Turn the adjusting nut while holding the brake light
switch in place. To make the brake light come on
earlier, turn the adjusting nut in direction (a). To
make the brake light come on later, turn the adjust-
ing nut in direction (b).
(a)
1. Rear brake light switch
2. Rear brake light switch adjusting nut
8-46
1
2
(b)
8