5-12 Serial Ata Connections - Supermicro SuperServer 6026TT-HTRF User Manual

SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL
Onboard Power LED
The LE1 LED is to indicate the system
power is on. Be sure to turn off the
system and unplug the power cord before
removing or installing components. See
the table at right for more information.
Infi niBand LED Indicators (LEB1/
LEB2)
There are two LEDs associated with the
Infi niBand connection: LEB1and LEB2.
The green LED (LEB1) is the Infi niBand
Link LED and the yellow LED (LEB2)
indicates activity. Refer to the table on
the right for details.

5-12 Serial ATA Connections

SATA Ports
There are six Serial_ATA ports on
the motherboard (I-SATA ports 0~5)
that support SATA 2.0 connections.
See the table on the right for pin
defi nitions.
Note: For more information on SATA RAID confi guration, please refer to the Intel
SATA HostRAID or LSI MegaRAID User's Guide posted on our Website @
www.supermicro.com.
Onboard PWR LED (LE1)
Indicator Settings
LED Color
Off
Green
Green:
Flashing
Quickly
Infi niBand Link LED (LEB1)
Indicator Settings
Color Status
Green Solid
Off Off
Infi niBand Activity LED (LEB2)
Indicator Settings
Color Status
Yellow Solid
Yellow Dim
Off Off
SATA Connector
Pin Defi nitions
Pin#
1
2
3
4
5
6
7
5-24
Defi nition
System Off (PWR cable
not connected)
System On
ACPI S1 State
Defi nition
Infi niBand: Connected
No connection
Defi nition
Infi niBand: Active
Infi niBand: Connected
Activity: Idle
No connection
(I-SATA0~5)
Defi nition
Ground
TX_P
TX_N
Ground
RX_N
RX_P
Ground
http://