Operation - Milwaukee M18 JSR Operator's Manual

M18 jobsite radio
Hide thumbs Also See for M18 JSR:
Table of Contents

Advertisement

WARNING
charger
charging instructions, read the operator's
manual supplied with your charger and
battery.
Inserting/Removing Battery Pack
Insert the battery pack by sliding it into the bat-
tery bay.
To remove the battery pack, pull the battery pack
off of the bay.
Low Battery Indicator
When the radio is powered by a battery pack, a low
battery indicator will be displayed when the battery
pack needs to be charged.
Battery Pack Protection
To protect the life of the battery pack, the radio will
shut off when the battery's charge becomes too
low. If this happens, remove the battery pack and
charge it according to the charger's instructions.
Installing an Auxiliary Device
Open the Auxiliary Compartment to connect an
MP3 player, CD player, or other audio device using
the stereo auxiliary jack. Small devices (less than
82 mm wide, 184 mm high, and 28 mm thick)
can be stored in the compartment during use.
USB Power Outlet
This jack can be used to charge a cell phone,
power a CD player or any other device that uses
less than 2.1 A of DC electrical current. Function
will only occur when the radio is plugged into an
outlet, or the radio is on and an M18™ battery pack
is inserted. The USB Power Outlet will not function
off of a battery pack with the radio off.
NOTE: Any device that uses more than 2.1 A of DC
electrical current will trip a self-resetting function
and disable the output.
WARNING
pack before changing or removing acces-
sories. Only use accessories specifically
recommended for this radio. Others may be
hazardous.
WARNING
or electric shock, do not expose this radio to
rain or moisture.
Recharge only with the
for the battery. For
Always remove battery
To reduce the risk of
ASSEMBLY
WARNING
cals or may explode if used incorrectly. The
following care should be taken to prevent
such an incident:
• Make sure the positive (+) and negative (-)
battery terminals are positioned correctly.
• Do not mix new and old batteries together,
or mix different types of batteries.
• Do not try to recharge non-rechargeable
batteries.
If chemicals from the batteries come in
contact with your skin, wash them off imme-
diately with water. If chemicals leak onto the
radio, clean the radio completely.
Changing Back-up Batteries
To hold station presets and clock time when the
battery pack is removed and the radio is unplugged,
2 AAA batteries are re-
quired.
1. Remove battery pack
and unplug radio.
2. Remove the screw
and battery cover.
3. Insert two (2) AAA
batteries according
to matching positive
(+) and negative (-)
marks.
4. Replace the battery
cover and screw.

OPERATION

Turning On/Off and Volume Control
Plug the cord into an appropriate AC outlet or install
an M18™ battery pack.
Turn the On/off / Volume
power and sound functions.
Setting the Clock
1. Press and hold the CLOCK button until the hour
2. Use the
3. Press the CLOCK button again. Use the
to change the minutes.
4. Press the CLOCK button again to save.
5
Batteries may leak chemi-
knob to control the
buttons to change the hour.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents