Radio Assembly; Radio Operation - Milwaukee M12 RCDAB+ Operator's Manual

RADIO ASSEMBLY

Recharge only with the charger
WARNING
manual supplied with your charger and battery.
The MILWAUKEE
®
DAB+ can be powered by MILWAUKEE
Li-Ion battery packs or the supplied 14V adaptor.
When connected to the supplied adaptor plugged
into a 230-240V socket outlet, the battery bay can
charge MILWAUKEE
(see Charger Operation).
Inserting/Removing Battery Pack
1. To insert the battery pack, slide it into the battery
bay.
2. To remove the battery pack, pull the battery pack
out of the bay.
Low Battery Indicator
When the radio is powered by a battery pack and
its charge falls below 10%, the low battery indicator
is displayed.
Battery Pack Protection
To protect the life of the battery pack, the radio will
If this happens, plug Radio + Charger into the
supplied adaptor and connect to a 230-240V socket
outlet and charge the battery pack according to
Charger Operation.
USB Power Outlet
This outlet can be used to charge a cell phone, power
an MP3 player or any other device that uses less than
2.1A of DC electrical current.
NOTE: Any device that uses more than 2.1A of DC
electrical current will trip a self-resetting overload
and disable the output.

RADIO OPERATION

Always remove battery pack before
WARNING
changing or removing accesso
mended for this radio. Others may be hazardous.
expose this radio to rain or moisture.
Connect the Radio + Charger to the supplied adaptor
and connect to a 230-240V socket outlet or install a
battery pack.
Press and hold the On/Off button
turns ON or OFF. LCD illuminates, and begins in
same mode as when device was powered off. To
display the time, press the CLOCK button. Volume
is restored to the last setting.
NOTE: When the Radio + Charger is running on
battery power, the display will dim after 5 minutes to
reduce power use.
Use the Volume up and down buttons to increase or
decrease the volume.
Getting Started
When Radio + Charger is first powered up, it will
enter DAB+ mode and automatically scan for
stations. It will then set the time and start playing
the first station it finds.
If there is no signal available, the Time setting
function can be accessed in the clock menu after
pressing the CLOCK button.
Power
M12™ Radio + Charger with
M12™ Li-Ion battery packs
®
until the radio
1. Press and hold the CLOCK button until CLOCK
SYNCHRO appears.
-
2. Use the
DISABLE.
3. Press the CLOCK button to confirm selection.
4. When
synchronise clock through digital radio):
M12™
®
a. Press the CLOCK button so that hour begins to
flash.
b. Press the CLOCK button a second time so that
the minutes begin to flash.
c. Press the CLOCK button a third time which will
automatically set the clock to current local time.
5. When choosing DISABLE (to manually adjust the
clock):
a. Press the CLOCK button so that hour begins to
flash and use the
hour.
b. Press the CLOCK button so that the minutes
begin to flash and use the
change the minutes.
c. Press the CLOCK button again to save the
time.
Press and hold the MODE button to enter tuning
mode. Use the ◄ and ► buttons or
buttons to adjust Treble, and then Bass.
Push the MODE button to select DAB+, FM or AM.
Press the ◄ and ► buttons to move up and down
the band. Press, hold, and release the ◄ and ►
buttons to SEEK through the band. When a station
is found, the SEEK will stop.
To choose a station, use the
choose station. To remove invalid stations, indicated
in the stations list with a "?" in front of the station
name:
-
1. Press and hold the MENU button.
Use the
2.
on the display.
Use the
3.
To set the PRESET stations:
1. Tune to desired station.
2.
Press and hold the PRESET button until AUTO-
SCAN appears.
3. Use the
PRESET and press PRESET to select this
option. Use the
PRESET location.
4. Press the PRESET button to save the location.
To tune to a PRESET station:
Press and release the PRESET button to step
through the PRESET stations.
4
Setting the Clock
and buttons to choose ENABLE or
◄ ►
choosing ENABLE
◄ and ► buttons to change the
◄
EQ Adjustment
Selecting Band
Tuning and Seeking
Digital Radio (DAB+)
◄
◄ ►
and buttons until PRUNE appears
and buttons to choose YES.
◄ ►
PRESET Stations
◄ and ► buttons to select STORE TO
◄ and ► buttons to select the
(to automatically
and buttons to
►
and
and buttons to
►