Milwaukee M18 JSR DAB+-0 Operator's Manual

Milwaukee M18 JSR DAB+-0 Operator's Manual

Digital jobsite radio dab+

Advertisement

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
OPERATOR'S MANUAL
Cat. No.
M18 JSRDAB+-0
MODE
PRESET
MENU
ENTER

Advertisement

Table of Contents
loading

Summary of Contents for Milwaukee M18 JSR DAB+-0

  • Page 1 OPERATOR'S MANUAL Cat. No. M18 JSRDAB+-0 MODE PRESET MENU ENTER TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
  • Page 2: Important Safety Instructions

    220 - 240 volt AC line or AC generator. only with the charger for the battery. It may also be powered using a MILWAUKEE ® M18™ A charger that may be suitable for one type of battery pack.
  • Page 3 SYMBOLOGY To reduce the risk of injury, user must read operator’s manual. Volts Alternating Current Amps Hertz Double Insulated Presence of important operating instructions. Caution. Risk of electric shock. Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements. This tool is only suitable for indoor use.
  • Page 4: Functional Description

    FUNCTIONAL DESCRIPTION MODE PRESET MENU ENTER 1. Antenna 2. Auxiliary compartment 3. Cord wrap 4. Cord 5. Backup-battery compartment 6. Battery bay 7. AUX storage 8. Stereo AUX jack 9. USB power outlet 10. Display 11. Mode button 12. Seek/adjust down 13.
  • Page 5 ASSEMBLY WARNING WARNING Recharge only with the Batteries may leak chemi- charger for the battery. For cals or may explode if used incorrectly. The charging instructions, read the operator's following care should be taken to prevent manual supplied with your charger and such an incident: battery.
  • Page 6 Setting the Clock Digital Radio (DAB+) 1. Press and hold the MENU button until the To choose a station, use the left/rig buttons to display changes. choose station. Press the ENTER button to confirm station. 2. Use the left/ri buttons until SYSTEM appears To remove invalid stations, indicated in the on the display and press the ENTER button.
  • Page 7 If the tool does not start or operate at full power product was originally purchased or one of our ® with a fully charged battery pack, clean the authorised MILWAUKEE service centres. contacts on the battery pack. If the tool still does not work properly, return the tool, charger and...
  • Page 8 SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

Table of Contents