Radio Operation - Milwaukee M18 RC Operator's Manual

RADIO OPERATION

WARNING
Always remove battery
pack before changing or removing acces-
sories. Only use accessories specifically
recommended for this radio. Others may be
hazardous.
WARNING
To reduce the risk of fi re
or electric shock, do not expose this radio to
rain or moisture.
Turning On/Off and Controlling Volume
Plug the cord into an appropriate AC outlet or install
a battery pack.
Press the On/Off/Volume control button
the radio on and off. The radio station (frequency)
is displayed. To display the time, press the CLOCK
button. Volume is restored to the last setting.
NOTE: When the Radio Charger is running on
battery power, the display will dim after 5 minutes
to reduce power use.
Rotate the On/Off/Volume control button
increase or decrease the volume.
Setting the Clock
1. Press and hold the CLOCK button until the hour
begins to ash.
2. Use the and buttons to change the hour.
3. Press the CLOCK button again. The minutes
will begin to ash. Use the
change the minutes.
4. Press the CLOCK button again to save.
EQ Adjustment
To manually adjust the Bass/Treble sound, press
the EQ button. Set the bass sound by rotating the
On/Off/Volume control button
button again to set the treble sound by rotating the
On/Off/Volume control button
Selecting Band
Push the MODE button to select Bluetooth, FM,
AM, or AUX.
Tuning and Seeking
Press the and buttons to move up and down
the band. Press, hold, and release the
buttons to SEEK through the band. When a station
is found, the SEEK will stop.
PRESET Stations
To set the PRESET stations:
1. Tune to desired station.
2. Press and hold the PRESET button until the
PRESET indicator on the display begins to ash.
3. Use the
location for the station. Five locations (1-5) are
available.
4. Press the PRESET button to save the location.
To tune to a PRESET station:
Press and release the PRESET button to step
through the PRESET stations.
Using the Stereo AUX Jack
1. Open the Auxiliary Compartment
2. Plug the auxiliary device into the Stereo AUX
jack.
3. Use the MODE button to select AUX.
to turn 4. Start the auxiliary device.
Using Bluetooth
To enter the Bluetooth mode, press the
ton, or press the MODE button to cycle through
to Bluetooth.
Pairing
• If no Bluetooth device is connected, Bluetooth
to
pairing will begin automatically and the
will ash on the display.
• The radio will continue to search for a signal for
3 minutes.
• To manually pair a device, press and hold blue-
tooth button until the
• While the
and buttons to
the Bluetooth capable device.
• Enter PIN "0000".
• Once the device has successfully paired with the
radio, the
Connecting
To enter the Bluetooth mode, press the
. Press the EQ
ton, or press the MODE button to cycle through
to Bluetooth.
.
When the radio locates a paired Bluetooth device,
the
If connection is lost between the radio and the
Bluetooth device, the radio will try to reconnect
automatically for up to 3 minutes.
Controlling
When streaming music through to the radio via
and
a Bluetooth device, use the
and pause the music. Use the
through the tracks.
6
and buttons to select the PRESET
begins to ash.
is ashing, select "Milwaukee" on
will be shown on the radio's display.
will be shown on the radio's display.
but-
icon
but-
button to start
and to move