Specifications; Extension Cords - Milwaukee M18 JSR Operator's Manual

SYMBOLOGY
To reduce the risk of injury, user
must read operator's manual.
Volts
Alternating Current
A
Amps
Hertz
Double Insulated
Presence of important operating
instructions.
Caution. Risk of electric shock.
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
This tool is only suitable for indoor
use. Never expose tool to rain.
Waste electrical products should not
be disposed of with household
waste.
facilities exist. Check with your local
authority or retailer for recycling
advice.

EXTENSION CORDS

As the distance from the supply outlet increases,
you must use a heavier gauge extension cord.
Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss
of power and possible tool damage. Refer to the
table shown to determine the required minimum
wire size.
The smaller the gauge number of the wire, the
greater the capacity of the cord. For example, a 14
gauge cord can carry a higher current than a 16
gauge cord. When using more than one extension
cord to make up the total length, be sure each cord
contains at least the minimum wire size required. If
you are using one extension cord for more than
one tool, add the nameplate amperes and use the
sum to determine the required minimum wire size.
Please recycle where
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICABLE PARTS INSIDE. REFER SERVICI-
ING TO QUALIFIED SERVICE PERSONNEL.
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous volt-
age" within the product's enclosure that may be of
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

SPECIFICATIONS

Cat. No.
M18 JSR
3
CAUTION
DO NOT OPEN
AC Volts AC Amps
220-240 0.5