DeVilbiss SB-2-545-L Operation Manual page 9

TROUBLESHOOTING (continued)
CONDITION
Thick, dimpled finish "orange
peel".
SB-2-545-L (5/2016)
CAUSE
Gun too close to surface.
Too much material coarsely atomized.
Air pressure too low.
Improper thinner being used.
Material not properly mixed.
Surface rough, oily, dirty.
9 / 12
CORRECTION
Check distance. Normally approx. 8".
Increase air pressure or decrease fluid pressure.
Increase air pressure or reduce fluid pressure.
Follow paint manufacturer's mixing instructions.
Follow paint manufacturer's mixing instructions.
Properly clean and prepare.
EN