Check Tire Pressure - Toro 08882 Operator's Manual

factory with oil. However, check the level of oil before the engine is
first started and daily thereafter.
1. Remove the cap from hydraulic oil reservoir.
2. Check the level of oil in the reservoir. the oil level should be up
to the top of cone point on the tank screen.
3. If the oil level is low, add SAE 10W-30 or 10W-40 SF type
motor oil until the level is up to the top of cone point on the
tank screen. DO NOT OVERFILL.
4. Install the reservoir cap.
IMPORTANT: To prevent system contamination, clean the top
of hydraulic oil containers before puncturing. Assure the pour
spout and funnel are clean.

CHECK TIRE PRESSURE

Check tire pressure before operating the machine. Correct air pres-
sure in the front and rear tires is 27–41kPa.
10
Figure 3
1. oil reservoir cap