Changing The Engine Oil - Toro 74855 Operator's Manual

Changing the Engine Oil

Service Interval: After the first 8 hours—Change the engine
oil.
Every 100 hours—Change the engine oil (more often
in dusty, dirty conditions).
Note: Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to ensure the oil drains
completely.
2. Disengage the PTO, move the motion-control levers
to the N -L
EUTRAL OCK
brake.
3. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
4. Drain the oil from the engine
A
C
E
Figure 36
5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark
position, and set the parking
(Figure 36).
B
D
F
G027539
(Figure 37).
A
C
E
Changing the Engine-Oil Filter
Service Interval: Every 200 hours—Change the engine-oil
filter (more often in dusty, dirty
conditions).
Note: Change the engine-oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine.
2. Change the engine-oil filter
32
B
D
F
g027660
Figure 37
(Figure 38).