Important - Maytag MGT8720DS Installation Instructions Manual

30" (76.2 cm) double oven gas ranges
Hide thumbs Also See for MGT8720DS:
Table of Contents

Advertisement

Available languages

Available languages

To Convert Gas Pressure Regulator
1. Locate gas pressure regulator at the rear of the range.
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
2. Unscrew the regulator cap and remove the plastic cover.
A. Plastic cover
B. Regulator cap
3. Flip the regulator cap over and replace the plastic cover.
A
A. LP gas position
B. Natural gas position
C. Plastic cover
4. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Oven Bake Burners
To Convert Lower Oven Bake Burner:
1. Remove oven racks from inside the oven cavity.
2. Remove oven door. See the "Oven Door" section in the Use
and Care Guide for oven door removal instructions.
16
A
A
B
B
C
3. Push the bake burner cover to the right.
A
A. Bake burner cover
4. Lift up and remove oven bake burner cover.
5. Unscrew wing nut and remove oven baffle.
A
A. Oven baffle
B. Wing nut
6. Remove the oven bake burner screw and set aside.
7. Gently set the bake burner to the side.
A
B
A. Igniter and wires
B. Bake burner screw
B

Advertisement

Table of Contents
loading

Table of Contents