Table of Contents
Advertisement
6.
Inspect the tapered caster bearings and races for
pitting or other damage (Figure 109).
Figure 109
7.
Pack the bearings with grease and reinstall in the
housing. Press in a new seal.
8.
Reassemble the caster into the bearings (Figure
110).
Figure 110
9.
Tighten the bearing adjustment nut until there is a
slight drag felt in the bearings.
10. Replace the dust cap.
Mid-Mount Z Service Manual
1030-017
1030-012
CHASSIS
5 - 15
Advertisement
Table of Contents
