Table of Contents
Advertisement
9.
Using a suitable pry bar, release the idler pulley
spring tension and remove the hydraulic pump
drive belt.
Figure 24
10. Remove the 4 engine mounting bolts.
11. Slide the engine toward the rear of the machine
and rotate it slightly counterclockwise until the
hydraulic pump belt drive pulley clears the
chassis. Then, lift the engine from the chassis.
Engine Remove & Replace
Liquid-Cooled
1.
Disconnect the negative battery cable.
Figure 25
Mid-Mount Z Service Manual
2.
Remove the pins from the radiator cover and lift
off the cover.
1023-012
3.
Remove the radiator cap and open the drain
petcock to drain the coolant into a suitable
container.
0507-001
ENGINE
Figure 26
Figure 27
0507-002
0507-003
3 - 3
Advertisement
Table of Contents
