Table of Contents
Advertisement
8.
To remove the brake brackets, remove the 2 bolts
at the front of the wheel motor and remove the
bracket (Figure 81).
Figure 81
9.
To remove the brake shaft, first remove the
hydraulic fluid reservoir which is held in place by 2
cap screws and nuts (Figure 82).
Figure 82
Mid-Mount Z Service Manual
10. Then remove the brake shaft bearing bolts at
either end of the shaft (Figure 83).
1227-001
11. Then lift the brake shaft out of the chassis.
12. To remove the brake lever, first remove the control
panel at the console (Figure 84).
1030-006
CHASSIS
Figure 83
Figure 84
1030-009
1030-008
5 - 5
Advertisement
Table of Contents
