ENGINE
4.
To drain the block, remove the drain bolts.
NOTE: apply sealant to the bolt threads during
reassembly.
Figure 28
5.
Loosen the radiator hose clamps at the water
pump and thermostat housing and remove the
hoses from the fittings.
6.
Unplug the electrical connections from the
temperature sender and fan motor.
Figure 29
3 - 4
7.
Remove the bolts securing the overflow bottle to
the engine guard.
0507-004
8.
Remove the 7 bolts securing the radiator support
to the engine guard.
9.
Carefully lift the radiator assembly from the unit.
0507-005
Figure 30
Figure 31
Mid-Mount Z Service Manual
0507-006
0507-007