Table of Contents
Advertisement
6. Attach the throttle assembly to the outside of the
handlebar and secure it with a nut and a pan screw
(Figure 5).
1
2
Filling the Engine with Oil
No Parts Required
Procedure
Important: Your machine does not come with oil
in the engine. Before starting the engine, fill the
engine with oil.
Max. fill: 0.59 l (20 oz.), type: SAE 30 or SAE 10W-30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.
1. Move the machine to a level surface.
2. Remove the dipstick (Figure 6).
2
g017337
Figure 5
2
1
g017332
1. The oil level is at its
maximum.
2. The oil level is too
high—remove oil from
the crankcase.
3. Slowly pour oil into the oil fill hole, wait 3 minutes,
and check the oil level on the dipstick by wiping the
dipstick clean and then inserting, but not screwing
in, the oil fill cap into the hole (Figure 7).
Note: Fill the engine crankcase with oil until the
dipstick indicates that the engine oil level is correct
as shown in Figure 6. If you overfill the engine with
oil, remove the excess oil as directed in Changing
the Engine Oil.
4. Install the dipstick and hand tighten it securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
7
3
Figure 6
3. The oil level is too
low—add oil to the
crankcase.
g017338
Figure 7
Advertisement
Table of Contents
