Assembling The Handle - Toro 2603 Operator's Manual

Setup
1

Assembling the Handle

No Parts Required
Procedure
1. Slide 2 bushes into the frame (Figure 3).
3
6
g017333
1. Lower handle
2. Bushes
3. Nut
2. Place the lower handle between the bushes and
secure it with 1 handlebar bolt, 2 washers, and 1 nut
(Figure 3).
Note: Place the lower handle between the bushes
with the kick stop assembly on the right hand side.
3. Repeat for the opposite side.
1
2
4
Figure 3
4. Frame
5. Bolt
6. Washers
4. Align the holes on the upper handle with the lower
handle (Figure 4).
5
4
1. Upper handle
2. Hand wheel
3. Washer
5. Fit the U bolt through the upper and lower handle
and secure it with a washer and a hand wheel
(Figure 4).
5
6
g017328
Figure 4
4. U bolt
5. Lower handle
1
3
2