Install Software - Epson ET-4550 Start Here

4
Slide the side edge guides against the paper, but not too
tightly.
5
Keep the cassette flat as you insert it all the way in.
6
Pull out the output tray.
7
Select the paper settings on the product's control panel.
4
Connect the fax line
1
Connect a phone cord to a telephone wall jack and to the
LINE port on your product. See the online User's Guide
for more information.
2
Press on the control panel if you want to set up the fax,
or press to set it up later.
5

Install software

Note: If your computer does not have a CD/DVD drive or you are
using a Mac, an Internet connection is required to obtain the product
software.
1
Make sure the product is NOT CONNECTED to your
computer.
Windows : If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable.
2
nsert the product CD or download and run your product's
I
software package:
epson.com/support/et4550 (U.S.) or
epson.ca/support/et4550 (Canada)
3
Follow the instructions on the screen to run the setup
program.
OS X: Make sure you install Software Updater to receive
firmware and software updates for your product.
4
When you see the Select Your Connection screen, select
one of the following:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have a USB cable (not included).
• Wired network connection
Make sure you have an Ethernet cable (not included).
Mobile printing options
To print from a mobile device, your product must be set up for
wireless printing or Wi-Fi Direct
for instructions.
iOS/Android
™
epson.com/iprint
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID). The
product can only connect to a network that supports
2.4 GHz.
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Passwords must be entered in the correct case.
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if any of the print head nozzles are
clogged. Then clean the print head, if necessary. See the online
User's Guide for more information.
The product's screen is dark.
Make sure your product is turned on and press any button to
wake it from sleep mode.
. See the online User's Guide
®
Epson Connect
™
Connect wirelessly from
your tablet, smartphone, or
computer. Print documents
and photos from across the
room or around the world.
epson.com/connect