Maintenance of the milk valve
The milk valve should be cleaned once
a week to ensure good quality milk froth
and prevent sputtering.
The
Drinks
menu is visible in the display.
Touch
Main menu
Select
Maintenance
the central spout
The central spout and the milk valve will
move into the maintenance position.
You must remove the cleaning
brush before confirming the
message in the display. Otherwise
the coffee machine will be damaged.
Insert the brush in the milk valve and
move it back and forth.
Touch
.
OK
The milk valve will move into the initial
position and the milk pipework will be
rinsed.
or .
and then
Clean
.
OK
Cleaning and care
Milk flask with lid
Soiling can cause a fault in the
machine.
It is important to keep the neck and
flange of the flask clean (whilst filling
it and carrying it).
Clean the milk flask holder on the
coffee machine with a damp cloth.
Clean the glass milk flask in the
dishwasher or by hand using hot
water and a little washing-up liquid
applied with a soft cloth. Dry the milk
flask thoroughly.
Before placing the lid of the milk flask
in the dishwasher:
Rinse the milk pipework in the lid
under running water.
If water does not run out of the milk
pipework ,
dismantle the milk flask lid and clean
it with the cleaning brush supplied.
65