Advices - e-motion STAND UP User Manual

STAND UP does not require any initial kind of lubrication, it is prepared to travel
the first km. without any type of maintenance, afterwards, the standard
maintenance. STAND UP and its components shall be checked before riding.
Remember that if one detects any problem which can not solved by oneself,
please contact with an official dealer.
Take as usual the following checks before riding the vehicle
Verifications before riding:
-
WHEELS
-
HANDLEBAR AND STEM
-
HEADSET AND FORK
-
BRAKES
-
BATTERY AND HARGER
It is extremely important the brakes to work correctly for one safety
and that of others. Carefully check the brake system each time before
riding and do not use the STAND UP if a problem is detected.
See section: MECHANISM AND MAINTENANCE
-
Keep your bike clean to ensure proper functioning.
-
Protect the STAND UP against thieves. Use a lock for more security.
-
Do not overpass the allowed weight.
-
Ride with care
See section: SAFETY.
-
No additional passenger is allowed on the STAND UP (one person only)
-
A speedometer can help to control the autonomy and maintenance of the
vehicle.
-
Plan your route according to the autonomy of the vehicle.
-
Avoid water entering into the bearings.
-
The battery must be charged in an airing area.
-
A programmer by the charger plug is to help in the charger task.

8. ADVICES