Table of Contents
Advertisement
Installing the Handle
1. Cut the plastic tie that secures the control cable
to the handle.
2. Position the upper handle as shown.
3. Loosely
install the handle
bolts, curved
washers, and
knobs as shown.
4. Hook the end
of the control
cable into the
bottom hole of
the control bar.
m-6105
5. Fully insert the handle bolts.
Important:
Ensure that you
do not pinch the
control cable.
6. Tighten the
knobs until they
are snug.
7. Adjust the control cable. Refer to Adjusting the
Control Cable on page 9.
6
Installing the Discharge
Chute
Install the discharge chute as shown.
Before Starting
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline can burn you and
others.
To prevent a static charge from igniting the
gasoline, place the container and/or
m-6104
snowthrower on the ground before filling, not
in a vehicle or on an object.
Fill the tank outdoors when the engine is
cold. Wipe up spills.
Do not handle gasoline when smoking or
around an open flame or sparks.
Store gasoline in an approved fuel container,
out of the reach of children.
3327-933
m-6187
Danger
Advertisement
Table of Contents
