Product Overview; Controls - Toro 30319 Operator's Manual

Product Overview

Figure 15
1. Gas tank
2. Upper handle
3. Blade control bail
4. Throttle control
5. Handle

Controls

Become familiar with all the controls (Figure 16)
before you start the engine and operate the
machine.
6. Engine
7. Mower deck
8. Front caster
9. Side discharge chute
Figure 16
1. Power take off switch (PTO) 7. Lower control bar
2. Parking brake
lever-released position
3. Upper handle
4. Blade control bail
5. Upper control bar
6. Lower handle
Throttle Control
The throttle control has three positions: Choke,
Fast and Slow.
Blade Control Bail
The bail is used in conjunction with the power
take off switch (PTO) to engage the clutch to drive
the mower blades. Release the mower control bail
to disengage the mower blades.
Power Take Off Switch (PTO)
This pull switch is used in conjunction with the
blade control bail to engage the clutch to drive the
mower blades.
Gear Shift Lever
The transmission has five forward speeds, neutral
and reverse, and has an in-line shift pattern.
17
8. Ignition switch
9. Throttle control
10. Gear shift lever
11. Fuel shut-off valve