Table of Contents
Advertisement
Figure 41
1. Fuel shut-off valve
Replacing the Fuel Filter
Replace the fuel filter after every 200 operating
hours or yearly, whichever occurs first.
Never install a dirty filter if it is removed from the
fuel line.
Note: Note how the fuel filter is installed.
Note: Wipe up any spilled fuel.
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for
all moving parts to stop before leaving the
operating position.
3. Close fuel shut-off valve at fuel tank
(Figure 41).
Note: Remove the fuel line from the fuel
valve that is closest to the engine.
4. Squeeze the ends of the hose clamps together
and slide them away from the filter (Figure 42).
2. Clamp
Figure 42
1. Hose clamp
2. Fuel line
5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps
close to the filter.
7. Open fuel shut-off valve at fuel tank
(Figure 41).
8. Check for fuel leaks and repair if needed.
Electrical System
Maintenance
Servicing the Fuse
The electrical system is protected by a fuse. It
requires no maintenance. If the fuse blows check
component or circuit for malfunction or short.
To replace fuse pull out on the fuse (Figure 43)
to remove or replace it.
33
3. Filter
Advertisement
Table of Contents
