Mounting The Fuel Tank; Installing The Muffler - Toro 30150 Operator's Manual

4. If clearance is not correct, loosen shift lever plate and
adjust it side–to–side. Tighten the shift lever plate.
1
4
4
3
Figure 11
1. Shift lever, 2nd gear
2. Shift lever plate

Mounting the Fuel Tank

1. Align fuel tank with the top of the rear frame (Fig. 12).
2. Secure the right side of the fuel tank to the rear frame
with 2 bolts (5/16 x 7/8 inch), lock washers (5/16 inch)
and washers (5/16 inch) (Fig. 12).
3. Secure the left side of the fuel tank to the rear frame
with 2 studs, washers (5/16 inch), springs and locknuts
(5/16 inch) (Fig. 12).
Note: Tighten left side of the fuel tank until it is completely
tight and then unscrew locknut one full turn. This will
allow the spring to work.
2
Rear View
2
m–7454
3. Shift lever, neutral
4. Equal distance
17
3
2
1
Figure 12
1. Bolt, 5/16 x 7/8 inch
2. Lock washer, 5/16 inch
3. Washer, 5/16 inch
4. Slide the hose clamp onto the fuel line (Fig. 13).
5. Push the fuel line onto the fuel tank connection and
secure it with a hose clamp (Fig. 13).
3
Figure 13
1. Fuel line
2. Hose clamp

Installing the Muffler

1. Loosen the clamp (Fig. 14).
m–3771
4
3
5
6
4. Stud
5. Spring
6. Locknut
2
1
m–6442
3. Fuel fitting