KVH Industries TracVision L3 Owner's Manual page 7

Figure 2-11
Figure 2-12
Figure 2-13
Figure 2-14
Figure 2-15
Figure 2-16
Figure 2-17
Figure 2-18
Figure 2-19
Figure 2-20a-d Attaching the KVH-provided F-connector
Figure 2-21
Figure 2-22
Figure 2-23
Figure 3-1
Figure 3-2
Figure 5-1
Figure 5-2
Figure 5-3
Figure 5-4
Figure 5-5
Figure 5-6
Figure 5-7
Figure 5-8
Figure 5-9
Figure 5-10
iv
Cable Overlap within the TracVision L3 Baseplate . . . . . . .2-7
Switchplate Panel Cutout Dimensions . . . . . . . . . . . . . . . .2-8
Proper Terminal Strip Wiring Arrangement
– Data Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8
Antenna Data Cable Wiring Arrangement . . . . . . . . . . . . .2-9
Proper Terminal Strip Wiring Arrangement
– Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9
Power Cable Wiring Arrangement . . . . . . . . . . . . . . . . . .2-10
Vehicle Power Wiring Arrangement . . . . . . . . . . . . . . . . .2-10
Mounting the Switchplate Support Frame
and Front Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11
Connecting the RF Cable to TracVision L3 . . . . . . . . . . .2-12
to an RF Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12
Installing Three or More IRDs Using an Active
Multiswitch (North American Systems Only) . . . . . . . . . .2-14
Skew Adjustment (European Systems Only) . . . . . . . . . .2-21
Remote Dish Wiring Configuration . . . . . . . . . . . . . . . . .2-23
Be Aware of Objects that Might Block
the Satellite Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
Turning on the TracVision L3 Using the Switchplate . . . . .3-1
Antenna, PCB, and Rotating Plate . . . . . . . . . . . . . . . . . .5-3
Close-up of Linear Actuator, Pivot Bracket, and Pin . . . . .5-3
Antenna Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4
Close-up of RF Detector and PCB . . . . . . . . . . . . . . . . . .5-4
PCB and RF Detector Board Connector Locations . . . . . .5-5
LNB Skew Angle Setting (European Systems Only) . . . . .5-7
Attaching the Shipping Restraints to the
Antenna Baseplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-8
Placing the Elevation Axis Shaft Restraint . . . . . . . . . . . . .5-8
Securing the Elevation Axis Shaft Restraint . . . . . . . . . . .5-9
Repackaging the TracVision L3 . . . . . . . . . . . . . . . . . . . . .5-9