Toshiba TOSVERT VF-AS1 Installation Manual page 12

Step6: Mount the EMC plate1 (Q) into both the conduit box (P) and the inverter with M6 screws. See
figure 14.
Be sure to install the EMC plate1 as figure 12 properly.
Do not operate the inverter without EMC plate1 properly in place.
Failure to follow this instruction can result in injury or equipment damage.
Step7: Install the EMC plate 2 (R) as shown in figure 15. This step is only for conduit box kit NEM1109Z.
Q
Figure 14
Step8: Install the conduit plate (S) with M4 screws. The knockouts provided are for control cables. Use
either a hole saw or a punch to cut entries for power cables. See figure 16.
Step9: Make all power and control connections to the inverter.
Step10: Install the conduit box cover (T) with M4 screws. See figure 17.
S
Figure 16
Step11: Replace the front cover (M) removed in step 2
Caution
T
- 10 -
E6581810
R
Figure 15
Figure 17