Oreck USER'S GUIDE User Manual page 8

maximum cleaning power.
How to fit the Towel Over the Rectangular Brush
The Oreck 100% White Terry Cloth Towel can be fitted on this brush so as to
absorb the dirt and protect delicate surfaces. It can also be used on vertical
washable surfaces following the same procedure as for the floor.
Step 1: Prepare White Terry Cloth
Towel. Place the brush on top
of the towel.
Step 2: The Angle Adapter is usually
already attached to the
Rectangular Floor/Carpet Brush.
Fit Floor Brush with the Angle
Adapter onto the Extension
Tube. If the angle adapter is not
Floor/Carpet
hold the brush with the
bristles down. With the angle
adapter pointing downward,
insert it into the hole in the the
back of the brush, then turn the
Angle Adapter 180°.
Step 3: Insert the electrical power cord
into the wall outlet. Press the
On/Off Power Switch position,
the Red Power On Light will
illuminate and wait for the Vapor
Cleaner to reach its working
temperature. The Vapor Ready
Light will illuminate when the
Vapor Cleaner has reached
Step 2: Fold the towel as shown.
7
attached to the
Brush,