Table of Contents
Advertisement
34
www.electrolux.com
1
Install the shelf supports in the opposite
sequence.
The retaining pins on the
telescopic runners must
point to the front.
12.3 Odour filter
The odour filter reduces the odours
which occur when you bake or grill. It
starts to work if the temperature in the
appliance is more than 50 °C. The odour
filter is placed on the oven ceiling and
regenerates itself. The odour filter is on
with all oven functions.
Activate the odour filter in
the Settings menu.
When the odour filter is on, the display
shows the symbol
At the end of the oven function, the
heated odour filter continues to operate
for the next 10 minutes. The odour filter
stops when you deactivate the appliance
or open the oven door.
12.4 Oven ceiling
WARNING!
Deactivate the appliance
before you remove the
heating element. Make sure
that the appliance is cold.
There is a risk of burns.
Remove the shelf supports.
You can fold down the heating element
on the oven ceiling to clean the oven
ceiling easily.
1. Hold the heating element with two
hands at the front.
2
.
2. Pull it forwards against the spring
pressure and out along the supports
on the two sides.
The heating element folds down.
3. Clean the oven ceiling.
4. Install the heating element in the
opposite sequence.
Install the heating element
correctly above the supports
on the inner walls of the
appliance.
5. Install the shelf supports.
12.5 Removing and installing
the door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove
the door from the appliance.
The door is heavy.
1. Open the door fully.
2. Fully press the clamping levers (A)
on the two door hinges.
Advertisement
Table of Contents
