Hitachi NR 83A Instruction Manual And Safety Instructions page 14

~l~:~NTEN~~~!SB
N OT~ :
The information contained in this Manual is designed to assist you in the safe maintenance of
the Nailer.
Some illustrations in this Manua[ may show details or attachments that di
your own Nailer.
er from those on
~IAINTENANCE AND
INSPECTION
Read section titled "SAFETY" (pages 4 - 6).
O Disconnect air hose and remove all nails from
Nailer when:
1) doing maintenance and inspection; and
2) clearing a jam.
Inspecting the magazine
DISCONNECT AIR HOSE.
Clean the magazine. Remove plastic tips or wooden tips
which may have accumulated in the magazine. Lubricate it
with Hitachi pneumatic tool lubricant.
l.k._t~~
3. WARNING LABEL
Change the WARNING LABEL if missing or damaged.
A new WARNING LABEL is available from a Hitachi
authorized service center.
1.
o
(~)~
/~/ -~~'
~~
C ij~= '
~)
))
4.
5.
_' J~~
J
)
="=il
'@
,1
\~'1 ~(7--'\~
'~l~ ll
~~'- //~f/1~~:;;(7- //~~f~rl~:L)'--~~\~
Warning
Label
Maintenance chart (See page 1 5)
Operator troubleshooting (See page 15)
~) ~~~~~
~~
~,
~,
O
Disconnect
~}
air hose
~~~
SERVICE AND
Nai[ Feeder
Magazine
REPAIRS
~ CAUTION
O Check that the najl feeder stides smoothly by pulling it
with finger.
If not smooth, nails can be driven at an irregular angle
and hurt someone.
2. Storlng
O When not in use for an extended period, apply a thin coat
of the lubricant to the steel parts to avoid rust.
O Do not store the Nailer in a cold weather environment.
Keep the Nailer in a warm area.
O When not in use, the Nailer shou]d be stored in a warm
and dry place.
Keep out of reach children.
O Only service personnel trained by Hitachi,
distributor or employer shall repair the Nailer.
O Use only parts supplied or recommended by
Hitachi for repair.
All quality Nailers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE:
Specifications are subject to change without any obligation
on the part of HITACHl.
-14-