Lamps - BMW G 650 GS Rider's Manual

Pull defective fuse upward out
of fuse box with toolkit.
If the fuses blow frequently,
have the electrical system
checked by an authorized spe-
cialized workshop, preferably a
BMW Motorrad retailer.
Installing fuse
Replace defective fuse with
fuse with required amperage.
An overview of the fuse as-
signment and the required
amperages is provided in the
chapter "Technical Data". The
numbers in the graphic match
the fuse numbers.
Close fuse cover.
Latch audibly engages.
Installing seat ( 39).

Lamps

Information
A defective bulb places
your safety at risk because
it is easier for other users to not
see the motorcycle.
Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.
The bulb is pressurized and
can cause injury if dam-
aged.
Wear eye and hand protection
when replacing bulbs.
An overview of the bulb
types installed in your mo-
torcycle is provided in the chap-
ter "Technical Data".
Do not touch the glass of
new bulbs with your fin-
gers. For installation, use a clean,
dry cloth. Dirt deposits, in par-
ticular oil and grease, interfere
with heat radiation from the bulb.
Overheating and therefore short
service life of the bulbs are the
consequence.
Replacing low-beam and
high-beam bulb
Make sure ground is level and
firm and park motorcycle.
8
83
z