Table of Contents
Advertisement
3
BIOS Setup
3.1.4.22 ECP Mode Use DMA
This is used to select the DMA channel of the parallel port.
3.1.4.23 PWRON After PWR-Fail
Off
On
Former-Sts When power returns after an AC power failure, the
3.1.4.24 Game Port Address
This field is used to select the game port's address.
3.1.4.25 Midi Port Address
This field is used to select the midi port's address. If you have
selected the midi port's address, you may select its IRQ in the "Midi
Port IRQ" field.
3.1.4.26 Midi Port IRQ
This field is used to select the midi port's IRQ.
66
When power returns after an AC power failure, the
system's power is off. You must press the Power
button to power-on the system.
When power returns after an AC power failure, the
system will automatically power-on.
system will return to the state where you left off
before power failure occurs. If the system's power is
off when AC power failure occurs, it will remain off
when power returns. If the system's power is on
when AC power failure occurs, the system will power-
on when power returns.
Advertisement
Table of Contents
