Table of Contents
Advertisement
2-13 Front Weight Assembly
Installation
NOTE: A floor jack should be used to help position
weights onto the brackets. When installing the weights
you should have another person to help position the
weights. Align the weight bracket holes over the front
wheel castor cap (Figure 2-13a). Secure brackets with
(1) 3/8"-16 x 2-5/8" x 3-3/8" U-bolt P#(K1460), (2) 3/8"
flat washers P#(K0047) and (2) 3/8"-16 nyloc nuts
P#(K1216) per side. The U-bolt is inserted from the
bottom. Repeat steps for weight bracket on opposite
side.
Figure 2-13a
Front Wheel
Castor Cap
Figure 2-13b
Weight
Position the weight P#(B0026) under the weight brackets
and secure with (1)1/2"-13 x 4-1/4" x 4-5/16" U-bolt
P#(K0331), (2) 1/2" flat washers P#(K0055) and (2) 1/2"-
13 nyloc nuts P#(K1247) per side (Figure 2-13b).
(1) 3/8" - 16 x 2-5/8" x 3-3/8" U-bolt
(2) 3/8"-16 Nyloc Nut
(2) 3/8' Flat Washer
(PER BRACKET)
Weight Bracket
Weight Brackets
(2) ½" - 13 x 4-1/4 x 4-5/16 U-bolt
(4) ½"-13 Nyloc Nut
(4) ½" Flat Washer
10
Advertisement
Table of Contents
