Chapter 11 Faq - LevelOne wap-0007 User Manual

A - 1 Device is used as wireless client, why can a wireless connection not be established?
After confirming that the device is powered normally and connected normally, please check the following
configurations of the wireless devices in the network:
1. The "AP SSID" values set by the wireless client are consistent with the SSID of the associated wireless
device or not.
2. The "AP MAC" values set by the wireless client are consistent with the MAC address of the associated
wireless device or not.
3. The safe mode and key set by the wireless client are consistent with those of the associated wireless device
or not.
4. The associated device has already enabled the wireless feature, and has been the AP mode or not.
A - 2 How to restore the device to the factory settings?
Tip: The following method will delete all original configurations of the device, so please use it with care.
Case I: Know the administrator password
Under normal circumstances, you can directly enter the System management- > Configuration management
page, and then click restore to manually restart the device, and the device can be restored to its factory
configuration.
Case II: Forget the administrator password
If you forget the administrator password, you will not be able to enter the WEB interface, and now you can only
use the Reset button to restore the factory configuration. Method: In the process of charged operation, hold down
the Reset button for more than 5 seconds, then release the button, and the device will be returned to the factory
settings, and automatically restart.

Chapter 11 FAQ

52