Radio Frequency Template - LevelOne wap-0007 User Manual

Bandwidth limitation: The available options are divided into exclusive and shared; Exclusive means each IP
address in this range uses the bandwidth; Shared means the IP address in this range shares the bandwidth.
Uplink/downlink bandwidth: Upload speed limit, download speed limit. Here, the maximum upload and
download rate of IP address in this range can be set. 0 means no limitation.
Back: Click to return to the interface at the next higher level.
Finish: Click on the complete configuration.
Cancel: Cancel the configuration information.

9.2 Radio frequency template

Set the radio frequency template for AP to distribute wireless RF parameters. Note: The radio frequency
templates can only be distributed to AP in batch.
The radio frequency template page shows the list of RF templates, in which all the parameters can be modified.
The radio frequency templates can also be deleted or added.
Click the Edit button on the right side of the radio frequency template to be modified, to modify the parameters of
the radio frequency template. Click the Delete button on the right side of the radio frequency template to be
deleted, to delete the radio frequency template.
In the Settings→RF template page, click the Add button, and a dialog box pops up as shown in the figure below,
and you can set the parameters set, and add a radio frequency template. Below is a detailed description of the
meaning of the parameters of the interfaces in adding radio frequency templates.
Figure 9- 9 RF template interface
Figure 9- 10 Radio frequency template
39