Drawings - LevelOne wap-0007 User Manual

Hide thumbs Also See for wap-0007:

Table of Contents

4.6 Drawings

The drawings are displayed in the architectural plan in the middle of the page. You can choose different drawings

from the drop-down list of the drawing, and can manage the drawings. Click on Distribution map import button,

to enter the interface as shown below.

Name: Shows the drawing name.

Number of devices: Shows the number of APs on the drawings.

Clients: Shows the number of the accessed terminal devices on the drawing.

File size: Shows the drawing size.

Notes: Shows the description information of the drawings.

Edit: Click to modify the drawing name and note information.

Delete: Delete the drawings.

In the top right corner of the page, there are two buttons, Add and Delete, and you can add new drawings and

delete drawings in batch.

Add drawings: Click Add button, and the dialog box pops up, as shown in the figure below, to upload

drawings and enter the name and description of the drawing.

Note: The drawing name supports only the names that contain upper/lowercase letters, numbers,

underline, and the picture name only supports JPG format.

Figure 4- 7 Coverage distance of map

Figure 4- 8 Import drawing interface

Table of Contents