Connecting The Device - LevelOne wap-0007 User Manual

Figure 2- 2 Attaching Brackets to the Device 1
(3) Insert the Device into the rack, and align the brackets in the rack.
(4) Use the supplied screws to secure the Device in the rack, as shown in Figure 2- 3.
Figure 2- 3 Mounting the Device in a Rack 2

2.5 Connecting the Device

Follow these steps to connect the Device:
1）Connect the Device to the local network
Connect one end of an Ethernet cable to one of the LAN ports on the Device, and the other end to a network port on
a PC, hub, switch or wireless access point. Repeat this step to connect more PCs or other network devices to the
Device.
2）Power on the Device.
Before you power on the Device, make sure that the power supply is normal and well grounded.
Figure 2-4 Connecting the Device to Network
6