Table of Contents
Advertisement
2-8 Lower Mount Tube and Upper
Frame Assembly Installation
Position the (2) lower mount tubes P#(B0752) on top of
the tabs located on the rear frame bracket. Secure each
lower mount tube to the rear frame bracket using (2)
5/16"-18 u-bolts P#(K1098) and (4) 5/16"-18 nylon flange
locknuts P#(K2516). Refer to Figure 2-8.
NOTE: Orient the lower mount tubes so that the top
assembly mounting holes are aligned with each other,
and perpendicular to the rear frame bracket.
Position the upper frame assembly P#(A1058) above the
lower mount tubes as shown in Figure 2-8. Insert the
upper frame assembly onto the lower mount tubes and
secure using (2) 1/2" x2-1/2" clevis pins P#(K0133) and
(2) hair pin clips P#(K0088).
Figure 2-8
Clevis
Pin
Hair Pin
Clip
(2) 5/16"-18 U-Bolts
PER BRACKET
Upper Frame
Assembly
Lower Mount
Tube
10
(4) 5/16"-18 Locknuts
PER BRACKET
Advertisement
Table of Contents
