Getting Started - Waterpik WP-450 Manual

8

GETTING STARTED

Important! Turn Water Flosser
off and charge for 24 hours
before first use. Plug the cord into any
standard electrical outlet. Make sure you push
the switch into the "0" position before charging.
The unit will not charge if the switch is in the
"l" position. See "Care of your Waterpik
Flosser" for guidance on how to look after your
battery. The Waterpik ® Water Flosser will stay
charged for up to 2 weeks depending on use.
I
II
I
Filling the Reservoir
Lift flip top on reservoir and fill the reservoir
with lukewarm water. Disconnect charging cord
from the unit prior to filling the reservoir and
product use.
® Water
IMPORTANT!
TURN OFF.
OFF
Charge for 24 hours
before first use.
Inserting and Removing Tips
Insert tip into the center of
the knob at the top of the
Water Flosser handle. The
colored ring will be flush
with the end of the knob if
the tip is correctly locked
into place.
To remove the tip from
the handle, press the
tip eject button
and pull tip from
the handle.