Waterpik WP-450 Quick Start Manual

1
Charge Unit for 24 Hours
Prior to First Use.
I
OFF
O
II
I
Plug
in
3

Fill the Reservoir:

Remove
Plug
Lift the flip top on
reservoir and fill
with lukewarm
water. Refill as
needed.
QUICK START GUIDE
Turn power
OFF (O),
switch
plug power cord
into outlet, and
insert the charging
cord into the unit.
Unplug
charging
cord from
unit prior to
filling with
water and
during use.
Model WP-450
2

Insert Tip:

Select the appropriate
tip and insert into the unit.
Press firmly until the tip
clicks into place.
Insert
Caution: Do not
press tip eject button
while unit is running.
4

Adjust Water Pressure:

For first time use,
adjust the pressure
setting to the
I
LOW (I) setting
Pressure
O
Setting
II
LOW
I
To increase water
pressure move to
HI (II) setting.
continued on back