Failure to do so might result in ill-formed HTML intermittently being returned to
clients
Test the Installation
Now you will manually start the Oracle HTTP Server to verify the installation and
configuration of the server
$APACHECTL START
Browser Test
You can test the installation using your web browser
following URL with the information for the Oracle HTTP Server you just installed:
HTTP://host.domain:<port>
If this is a new installation, the browser should display the standard introductory
page with the following bold text at the top:
"If you see this, it means that the installation of the Apache web server
software on this system successful."
The Apache logo is displayed at the bottom.
TELNET Test
You can also use TELNET on the local host to test the installation
following procedure:
1.
2.
3.
.
This problem might also appear when executing CGI scripts.
Enter the following command:
$ TELNET 0 80
The following text is displayed:
%TELNET-I-TRYING, Trying ... 127.0.0.1
%TELNET-I-SESSION, Session 01, host localhost, port 80
-TELNET-I-ESCAPE, Escape character is ^]
Press ENTER and enter the following HTTP command:
HEAD / HTTP/1.0
Press ENTER twice.
Text similar to the following is displayed:
.
Enter the following command:
Apache Server Installation/Configuration D-3
Test the Installation
.
Replace host.domain in the
.
Use the