Table of Contents
Advertisement
Installation Mount Options
Installation Mount Options
Mount and Unmount the Oracle9i CD-ROM
If you run the Oracle Universal Installer while the current working directory is in
the CD-ROM, then perform the following steps to mount the next CD-ROM:
Mount the Oracle9i CD-ROM device
$ MOUNT/OVERRIDE=IDENTIFICATION <ddcn>
where:
<ddcn> is a valid CD-ROM device.
Installation Option, Installing Oracle9i from the Hard Drive
You can avoid the need to mount and unmount CD-ROMs during installation by
copying the contents of each CD-ROM to your system hard drive. You must have a
file system that is not in use by other applications. You must also have at least
2.5 GB of disk space available.
1.
2.
4-2 Oracle9i Installation Guide Release 2 (9.2.0.2) for HP Alpha OpenVMS
Oracle Corporation does not support using the Oracle
Note:
Universal Installer that is shipped with releases 8.1.x or 9.0.1 to
install release 9.2.0.1.0 components.
Copy the CD-ROMs to your system hard drive
CD-ROM to a directory on a disk
$ copy <first CD> disk$disk1:[cdrom]
$ copy <second CD> disk$disk1:[cdrom]
Start the Oracle Universal Installer from the hard disk
Installer automatically finds the contents of each CD-ROM and does not prompt
for the location of any CD-ROM during the course of the installation.
.
For example:
.
Copy the contents of each
.
For example:
.
The Oracle Universal
Advertisement
Table of Contents
