Table of Contents
Advertisement
Error messages
Various messages are displayed on the screen during operation. In addition to the messages
telling you the current status or providing guidance for the next maneuver, the following error
messages may appear. If one of these error messages is displayed, carefully follow the in-
structions in the solution column.
Message
Please insert DVD-
ROM/map data disk.
DVD-ROM unreadable.
Please check DVD-
ROM.
DVD-ROM being
checked.
Cause
• The disc has been removed.
• There was no disc in the
system when the power was
switched on.
• A disc that the system cannot
read has been loaded.
• The disc is dirty or upside
down.
• The disc cannot be read
because of condensation.
• A disc was just inserted
• Vibration or the like made it
impossible to read the disc.
Solution
Insert the disc (sold
separately).
Insert the map disc.
Take out the disc, check if it
was upside down, clean it if
necessary, then re-insert it.
Take out the disc, allow
enough time for condensation
to evaporate (about 1 hour),
then re-insert the disc.
When the disc check is
complete, the following screen
is displayed automatically.
15
Advertisement
Table of Contents
