Main Unit; Inserting The Dvd-Rom; Removing The Dvd-Rom - Alpine NVE-N871A Hardware Manual

Dvd car navigation system
Hide thumbs Also See for NVE-N871A:
Table of Contents

Advertisement

Before Using This System

Main unit

DVD-ROM compart-
ment door
Access indicator
Blinking while the
DVD-ROM is being
accessed.
Eject button Press to
eject the DVD-ROM.

Inserting the DVD-ROM

1
Open the DVD-ROM
compartment door.
If a DVD-ROM is already in the main
unit, remove it by referring to
"Removing the DVD-ROM" section.
2
Insert the DVD-ROM with the
label side facing up.
When you insert the DVD-ROM into
a certain position, it is automatically
pulled into the navigation system.
Tips
3
Close the door.
Be sure to close the door to prevent
dust from getting inside.
12
c
c
Do not touch the surface of
the disc directly with your
fingers.
c
c
a The DVD-ROM is a delicate device. Avoid dropping or scratching it.
a Keep the DVD-ROM away from dust and moisture.
Tips
a Keep the door closed except when
changing the DVD-ROM.
a Before inserting or removing the DVD-
ROM, always turn the ignition key to
ACC or ON. You cannot remove or
Tips
insert the DVD-ROM with the ignition
key turned OFF.
a Do not insert any DVD Video discs or
other non-Alpine DVD-ROMs.

Removing the DVD-ROM

1
Open the door.
2
Press the EJECT button.
3
When the DVD-ROM has
been ejected part way,
take it out.
Do not close the door while the
DVD-ROM is being ejected.
If the eject button is pressed
with the DVD-ROM ejected
Tips
part way, the DVD-ROM will
be pulled into the system.
4
Close the door.
c
c
c
c

Advertisement

Table of Contents
loading

Table of Contents