Fitting The Front Panel - Viessmann VITODENS 100-W Installation And Service Instructions Manual

Further details regarding the individual steps
Checking all gas equipment for tightness at operating pressure
Danger
Escaping gas leads to a risk of
explosion.
Check all gas equipment for tight-
ness.

Fitting the front panel

1.
1. Hook the front panel into place.
Commissioning, inspection, maintenance
(cont.)
!
Please note
The use of leak detection spray
can result in faulty operation.
Leak detection spray must not
come into contact with electrical
contacts or seal the diaphragm
opening on the gas valve.
2.
2x
2. Tighten screws on the underside.
59