Fujitsu PRIMERGY BX630 Service Supplement Manual page 30

Installing processors
Figure 20: Installing the heat sink
V
ATTENTION!
If you do not add a second processor to the server blade, a dummy heat
sink must be installed on the second processor socket to make sure that
all server blade modules are cooled sufficiently.
To install the dummy heat sink, perform the procedure for removing it in
reverse, see
30
page 27.
Rev. 2.0
Replacement Routines
Ê Place the heat sink on
the processor and fix it
by fastening the four
supplied screws in
diagonally opposite
sequence.