Using The Bluetooth Audio Player - Kenwood DDX9903S Instruction Manual

BLUETOOTH
Settings for Bluetooth mobile
phone
You can change various settings for using Bluetooth
mobile phones on the <TEL SETUP> screen.
1
Display the <Bluetooth Setup> screen.
(Page 52)
2
Display the <TEL SETUP> screen.
• You can also display the <Bluetooth Setup>
screen by touching [ ] on the phone control
screen. (Page 55)
3
Configure the Bluetooth settings (1), then
confirm the adjustments (2).
• Scroll the page to show more items.
❏ Setting items
<Bluetooth HF/ Select the speakers used for
Audio> Bluetooth (both phone and audio
player).
• Front: Front speakers only.
• All (Initial): All speakers.
<Auto • 1 – 30 (in 5 second steps): The
Response> unit answers the incoming calls
automatically. Set the calling
ring time (seconds).
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
<Auto Pairing> • ON (Initial): Establishes
pairing automatically with the
connected iOS device (such as
iPhone) even if the Bluetooth
function is deactivated on
the device. (Auto pairing may
not work for some devices
depending on the iOS version.)
• OFF: Cancels.
<Sort Order> Select a first name or last name
to use when sorting the list in
alphabetical order.
• First: Sorts the list in the order
of first name.
• Last (Initial): Sorts the list in the
order of last name.
<Echo Cancel
Adjusts the echo volume.
Level> • −5 to +5 (initial: 0).
<Noise Adjusts the noise reduction
Reduction volume.
Level> • −5 to +5 (initial: 0).

Using the Bluetooth audio player

• To connect a new device, see page 50.
• To connect/disconnect a paired device, see
page 52.
❏ Indications and buttons on the source
control screen
1 2 3 4
5
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
Playback information
• The information displayed on the screen differs
depending on the connected device.
1 Connected device name
2 Playback mode (Page 60)
3 Signal strength and battery level (only when the
information is acquired from the device)
4 Tag data (current track title/artist name/album
title)*
• Touching [<] scrolls the text if not all of the
text is shown.
5 Artwork (Shown if the track contains artwork)
* Available only for devices compatible with AVRCP 1.3.
Continued on the next page...
ENGLISH 59