Kenwood DDX9903S Instruction Manual page 80

CONNECTION/INSTALLATION
❏ Connecting wires to terminals for Toyota Cars (for DDX916WSL)
VIDEO OUT
Page 83
REAR VIEW CAMERA
FRONT VIEW CAMERA
Pages 81 – 83
Page 83
Page 83
Connect the antenna
cord to the antenna
terminal.
1
Light green (Parking sensor wire)
Purple with white stripe (Reverse
sensor wire)
Blue with white stripe (Power control
wire)
Connector C
*
ANT CONT
9
80
Connect GPS antenna (7). (Page 84)
Page 83
Page 83
AV-IN
15 A fuse
PRK SW
Connect to the vehicle's reverse lamp
REVERSE
harness when using the optional rear
view camera.
When using the optional power amplifier,
P.CONT
connect to its power control terminal.
Connector B
Connect to the vehicle's harness.
Connector A
Connect to the vehicle's harness.
Connect to the vehicle's harness.
• Depending on the type of vehicle, it cannot be
connected. In this case, connect the JASO plug
C5
directly to the unit.
Connect the USB extension cable
(6). (Page 81)
Connect a navigation box.
(Page 83)
Steering
Remote
0
Connect to the vehicle's parking brake detection switch harness.
• For best safety, be sure to connect the parking sensor.
Pin Color and functions of Connector A, B, C and D
A1 Orange/White
A2 Yellow
A3 Blue
A4 Red
A5 Blue
A6 Black
White ª / White/Black ·
A8/A7
A10/A9 Gray ª / Gray/Black ·
Green ª / Green/Black ·
B2/B1
Purple ª / Purple/Black · Right speaker (rear)
B6/B5
C5 Blue
D21 Light green/Red
D22 Purple/Red
D23 Gray/Red
* When using Antenna Control, connect the ANT CONT lead
(blue) to A5 (blue) on the wiring harness.
If no connections are made, do not let the
cable come out from the tab.
Connect to the vehicle's
Connector D
steering remote harness.
• Depending on the type
D22
D21 D23
of vehicle, it cannot be
connected.
Dimmer
Battery
Antenna control
Ignition (ACC)
Antenna control
Ground connection
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Antenna control
Input 1
Input 2
Ground