Table of Contents
Advertisement
TRANSPORT, STORAGE AND DISPOSAL
6. TRANSPORT, STORAGE AND DISPOSAL
6.1 Transport
Before transporting, take out the rotor.
Only transport the unit in the original packaging.
Use a transport aid for transporting over longer distances to fix the motor shaft.
General transportation
6.2 Storage
During storage of the centrifuge the following environmental conditions must be observed:
in transport packaging
6.3 Disposal
In the event of disposing of the product, please observe the applicable legal regulations.
Information on the disposal of the electrical and electronic devices in the European
Community:.
The disposal of the electrical devices is regulated within the European Community by national
regulations based on EU Directive 2002/96/EC pertaining to waste electrical and electronic
equipment (WEEE).
In accordance with this, any devices delivered after 13/08/2005 on a business-to-business basis,
which includes the product, may no longer be disposed of in household waste. To document this
they have been marked with the following identification:
Because disposal regulations may differ from one country to another within the EU please contact
your supplier if necessary.
RoHS II Compliance
HERMLE Labortechnik GmbH, Siemensstraße 25, 78564 Wehingen, hereby declares and certifies
that all components manufactured are RoHS II compliant according to the definition and restrictions
given by the European Parliament Directive 2011/65/EC on the restriction of use of certain
hazardous substances in electrical and electronic equipment.
34
Air temperature
rel. humidity
-25 bis 60 °C
10 bis 75 %
Air temperature
rel. Humidity
-25 bis 55 °C
10 bis 75 %
Z326K_V3.15
Air pressure
30 bis 106 kPa
Air pressure
70 bis 106 kPa
© Hermle Labortechnik GmbH
Hide quick links:
Advertisement
Table of Contents
